Configuring Default Routeset

 

 

<Lab Topology>

 

We have set all the Links and Linksets between all NAs.

 

1. Configuring Default routing on NA1 & 5.

NA1 and NA5 only have a link for routing. Default routing is best for NA1 and 5.

Now we are going to configure default routing on NA1.

 

   1.1 Configuring Default Routeset on NA1

   Applications > MTP3 > NA1 > Routesets > Create > DPC 0, Destination Type : Default > Create

 

   Default Routeset is created. Let's get into DRS 0:x.x.x to create Route in Routeset.

   DRS: Default RouteSet

   1.2 Configuring route in Routeset (Default)

   Create > APC2222, Cost 10 > Create

   APC: Adjacent Point Code = Linkset

   'Route' is created successfully. but it still is deactivated.

    We need to activate Default Routeset for NA1. Click 'Activate'

Finally, NA1 Default Routeset is Active. we can route a message to everywhere from NA1.

 

You can set Default Routeset for NA5 as NA1. When you are creating Routeset for NA5, you should use APC = 4444 because NA5 has Linkset4444.

 

Congrats!